This is an old revision of the document!
SC14CVMDECT Devboard
There is an Open Hardware Devboard for the SC14CVMDECT module by Renesas/Dialog Semiconductor.
The sources/design files of the board can be found here.
Functions
The board offers a simple breakout of the pins of the SC14CVMDECT module. It can be powered via USB-C and the UART interface of the module is exposed on USB.
It has a hardware reset button for the DECT module. Additionally the reset pin of the module can be optionally connected to an GPIO pin of the UART converter chip via a jumper to be able to reset the DECT module via software.
It has two LEDs connected to the LED3/LED4 pins of the module. When working correctly D2 (the LED connected to pin LED3) blinks shortly when the board is powered on. If there is an issue with the DECT module it stays on.